
Resin Treatment Lines
1-Tower Static Resin Line
Compact Resin Treatment Line with Combined Slab Drying and Resin Curing
A compact natural-stone resin-treatment system designed around one GRAVITON COMBI static oven tower.
Process Flow
Typical station sequence of the line; the slab moves from left to right. The final layout depends on the selected configuration and the factory layout.
Description & Technical Details
The 1-Tower Static Resin Line is a compact natural-stone resin-treatment system designed around one GRAVITON COMBI static oven tower.
GRAVITON COMBI integrates two separate thermal chambers within one insulated vertical structure. One chamber is dedicated to drying slabs before resin application, while the second provides controlled thermal conditions for epoxy resin curing.
The number of drying and curing levels is configured according to the customer's required production capacity, treatment times and factory layout. Typical arrangements may include 10+20, 15+30 or other project-specific combinations.
The line can be configured for one-side or double-side slab treatment. In a double-side process, the reverse face is dried, resin-treated and reinforced with mesh where required. The slab is then cured, turned automatically and treated on the visible face before completing the final curing stage.
By combining drying and curing within one tower, the system provides controlled static treatment while maintaining a compact factory footprint.
| Treatment | One-Side Treatment | Double-Side Treatment |
|---|---|---|
| Typical cycle time | approximately 4–5 minutes per slab | approximately 6–8 minutes per slab |
| Production capacity | up to 15 slabs/hour | up to 10 slabs/hour |
Nominal capacity depends on slab dimensions, material characteristics, resin system, treatment recipe and selected equipment configuration.
- ARANEA Overhead Slab Handling Robot, including direct loading from gangsaws where applicable
- GRAVITON COMBI Combined Static Oven Tower for Slab Drying and Resin Curing
- PBU01 Slab Buffer and Initial Gelation Station
- RESINBOT Automatic Resin Application Robot
- MESH APPLICATION Automatic reinforcing-mesh application system
- PCK01 Slab Rotating Conveyor for double-side treatment
- VAC01 Inline Vacuum Chamber, optional
- MANTA-U Automatic Slab Unloading Robot
• Compact static resin-line architecture
• Separate drying and curing chambers within one tower
• Customer-specific allocation of drying and curing levels
• One-side and double-side treatment configurations
• Controlled thermal residence time for each slab
• Reduced installation footprint
• Suitable for marble and granite
• Modular automation and resin-treatment options
• Expandable according to future production requirements
Planning a project with 1-Tower Static Resin Line?
Share your material, slab size and capacity target, and we will prepare the right configuration and quotation for you. Technical data sheets are available on request.